Planet IGSW-24040T - 4.3.5 SNMPv3 Configuration

User’s Manual of IGSW-24040T
4.3.5 SNMPv3 Configuration
4.3.5.1 SNMPv3 Communities Configuration
Configure SNMPv3 community’s table on this page. The entry index key is Community. The SNMPv3 Communities
Configuration screen in Figure 4-3-4 appears.
Figure 4-3-4 SNMPv3 Communities Configuration Page Screenshot
The page includes the following fields:
Object Description
 Delete
Check to delete the entry. It will be deleted during the next save.
 Community
Indicates the community access string to permit access to SNMPv3 agent. The
allowed string length is 1 to 32, and the allowed content is the ASCII characters
from 33 to 126.
 Source IP
Indicates the SNMP access source address.
 Source Mask
Indicates the SNMP access source address mask.
Buttons
: Click to add a new community entry.
: Click to save changes.
: Click to undo any changes made locally and revert to previously saved values.
4.3.5.2 SNMPv3 Users Configuration
Configure SNMPv3 users table on this page. The entry index key are Engine ID and User Name. The SNMPv3 Users
Configuration screen in Figure 4-3-5 appears.
84