Planet IGSW-24040T - Page 496

User’s Manual of IGSW-24040T
Parameters:
<dc1>: DC power 1
<dc2>: DC power 2
<ac>: AC power
(default: Set or show digital output/fault alarm 1/2 power_fail)
<enable>: Enable digital input1/2 function
<disable> : Disable digital input1/2 function
(default: Set or show digital input/output/fault alarm 1/2 status)
Example:
Enable power alarm configuration.
SWITCH/>dido fault_pwr_alr dc1 enable
SWITCH/>dido fault_pwr_alr dc2 enable
SWITCH/>dido fault_pwr_alr ac enable
496