To Next Page

To Previous Page

User’s Manual of IGSW-24040T

Figure 4-10-3 ACE Configuration Page Screenshot

The page includes the following fields:

Object Description

 Ingress Port

Select the ingress port for which this ACE applies.

Any: The ACE applies to any port.

Port n: The ACE applies to this port number, where n is the number of the switch port.

Policy n: The ACE applies to this policy number, where n can range from 1 through 8.

 Frame Type

Select the frame type for this ACE.

Any: Any frame can match this ACE.

Ethernet Type: Only Ethernet Type frames can match this ACE.

ARP: Only ARP frames can match this ACE.

IPv4: Only IPv4 frames can match this ACE.

 Action

Specify the action to take with a frame that hits this ACE.

Permit: The frame that hits this ACE is granted permission for the ACE operation.

Deny: The frame that hits this ACE is dropped.

 Rate Limiter

Specify the rate limiter in number of base units. The allowed range is 1 to 15. Disabled

indicates that the rate limiter operation is disabled.

 Port Copy

Frames that hit the ACE are copied to the port number specified here. The allowed

range is the same as the switch port number range. Disabled indicates that the port

copy operation is disabled.

 Logging

Specify the logging operation of the ACE. The allowed values are:

Enabled: Frames matching the ACE are stored in the System Log.

195

Planet IGSW-24040T User Manual

Other manuals for Planet IGSW-24040T