Point Grey Flea3 USB 3.0 Technical Reference
Chapter What You Will Find
7. Image Parameters and Control
Brightness (page 95)
Shutter (page 111)
Gain (page 96)
Auto Exposure (page 114)
Gamma and Lookup Table (page 103)
Saturation (page 98)
Hue (page 100)
Sharpness (page 101)
White Balance (page 109)
Bayer Color Processing (page 117)
Image Flip/Mirror (page 119)
Embedded Image Information (page 119)
8. Troubleshooting
How to get support (page 122)
Status LED (page 125)
Diagnostics (page 123)
Test Pattern (page 126)
Blemish Pixel Artifacts (page 127)
Rolling Shutter Artifacts (page 128)
Fixed Pattern Noise Artifacts (page 129)
Appendix Register Reference Information (page 130)
Contacting Point Grey How to reach Point Grey Research Inc. (page 152)
Document Conventions
This manual uses the following to provide you with additional information:
A note that contains information that is distinct from the main body of text. For example,
drawing attention to a difference between models; or a reminder of a limitation.
A note that contains a warning to proceed with caution and care, or to indicate that the
information is meant for an advanced user. For example, indicating that an action may void
the camera's warranty.
If further information can be found in our Knowledge Base, a list of articles is provided.
Title Article
Title of the Article
Link to the article on the Point Grey website
Related Knowledge Base Articles
If there are further resources available, a link is provided either to an external website, or to the FlyCapture2 SDK.
Title Link
Title of the resource Link to the resource
Related Resources
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.
To Next Page
Loading...
