Point Grey Flea3 USB 3.0 Technical Reference 1 Welcome to Flea3 USB 3.0
1 Welcome to Flea3 USB 3.0
The fully redesigned, next generation Flea3 camera series builds on the success of the ultra-compact Flea2 by adding
new Sony image sensors to the line-up. The Flea3 also offers a host of new features, including enhanced opto-isolated
GPIO; an on-camera frame buffer; non-volatile flash memory for user data storage; new trigger modes; and improved
imaging performance.
1.1 Flea3 USB 3.0 Specifications
MODEL VERSION MP IMAGINGSENSOR
FL3-U3-13S2C-CS
FL3-U3-13S2M-CS
Color
Mono
1.3 MP
n Sony IMX035 CMOS, 1/3", 3.63 μm
n Rolling Shutter
n 1328x1048 at 120 FPS
FL3-U3-13Y3M-C Mono 1.3 MP
n On Semi VITA1300 CMOS, 1/2", 4.8 μm
n Global Shutter
n 1280x1024 at 150 FPS
FL3-U3-13E4C-C
FL3-U3-13E4M-C
Color
Mono
1.3 MP
n e2v EV76C560 CMOS, 1/1.8", 5.3 µm
n Global Shutter
n 1280x1024 at 60 FPS
FL3-U3-32S2C-CS
FL3-U3-32S2M-CS
Color
Mono
3.2 MP
n Sony IMX036 CMOS, 1/2.8", 2.5 μm
n Rolling Shutter with Global Reset
n 2080x1552 at 60 FPS
FL3-U3-88S2C-C Color 8.8 MP
n Sony IMX121 CMOS, 1/2.5", 1.55 μm
n Rolling Shutter with Global Reset
n 4096x2160 at 21 FPS
All Flea3 USB 3.0 Models
A/DConverter
12-bit (FL3-U3-13S2, FL3-U3-32S2, FL3-U3-88S2) / 10-bit (FL3-U3-13Y3,
FL3-U3-13E4)
Video Data Output 8, 12, 16 and 24-bit digital data
Image Data Formats
Y8, Y16, Mono8, Mono12, Mono16, Raw8, Raw12, Raw16 (all models); RGB,
YUV411, YUV422, YUV 444 (color models)
Partial Image Modes Pixel binning and region of interest (ROI) modes
Image Processing Gamma, lookup table, hue, saturation, and sharpness
Gain
Automatic*/Manual/One-Push* Gain modes (*Free running only)
0 dB to 24 dB (FL3-U3-13S2, FL3-U3-32S2, FL3-U3-88S2) / 0 db to 18 db
(FL3-U3-13Y3, FL3-U3-13E4)
Gamma 0.50 to 4.00
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.
1