Point Grey Flea3 FL3-U3 - Page 15

Point Grey Flea3 USB 3.0 Technical Reference 1 Welcome to Flea3 USB 3.0
All Flea3 USB 3.0 Models
White Balance Automatic/Manual modes, programmable via software
Color Processing On-camera in YUV or RGB format, or on-PC in Raw format
Digital Interface USB 3.0 interface with screw locks for camera control, data, and power
Transfer Rates 5 Gbit/s
GPIO
8-pin Hirose HR25 GPIO connector for power, trigger, strobe, PWM, and serial
I/O: 1 opto-isolated input, 1 opto-isolated output, 2 bi-directional I/O pins
External Trigger Modes IIDC Trigger Modes 0, 1 (excluding FL3-U3-13E4), and 15
Synchronization via external trigger or software trigger
Shutter
Rolling Shutter (FL3-U3-13S2) / Global Reset (FL3-U3-32S2, FL3-U3-88S2) / Global
Shutter (FL3-U3-13Y3, FL3-U3-13E4)
Automatic*/Manual/One-Push*/Extended Shutter** modes (*Free running
only) (**except FL3-U3-13Y3)
0.008ms to 1 second (FL3-U3-13S2) / 0.006ms to 1 second (FL3-U3-13Y3) /
0.016ms to 1 second (FL3-U3-13E4) / 0.01ms to 32 seconds (FL3-U3-32S2) /
0.021ms to 1 second (FL3-U3-88S2)
Image Buffer 32 MB frame buffer
Memory Channels 2 memory channels for custom camera settings
Flash Memory 1 MB
Dimensions 29 x 29 x 30 mm excluding lens holder (metal case)
Mass
Without optics: 35 g (FL3-U3-13S2, FL3-U3-32S2) / 41 g (FL3-U3-13Y3,
FL3-U3-13E4, FL3-U3-88S2)
Power Consumption 5 V, <3 W, via GPIO or USB 3.0 interface
Camera Specification IIDC v1.32
Camera Control via FlyCapture SDK, CSRs, or third party software
Camera Updates In-field firmware updates
Lens Mount
CS-mount (FL3-U3-13S2, FL3-U3-32S2) / C-mount (FL3-U3-13Y3, FL3-U3-13E4,
FL3-U3-88S2)
Operating Temperature 0° to 45°C
Storage Temperature -30° to 60°C
Emissions Compliance CE, FCC, RoHS
Operating System Windows 7 32- or 64-bit
Warranty Two years
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.
2