Point Grey Flea3 FL3-U3 - MEMORY_SAVE: 618 H; MEM_SAVE_CH: 620 H; CUR_MEM_CH: 624 H; Memory Channel Registers

Point Grey Flea3 USB 3.0 Technical Reference 3 General Camera Operation
Sharpness (page 101)
Shutter (including Absolute Value, Auto Shutter Range, and
Shutter Delay) (page 111)
White Balance (page 109)
Gain (including Absolute Value and Auto Gain Range) (page
96)
Hue (page 100) GPIOPin Modes (page 50)
Saturation (page 98) GPIOStrobe Modes (page 42)
Gamma (including Absolute Value) (page 103) GPIO PWM Modes (page 50)
Color Coding ID (page 146) Format 7 Bytes per Packet
3.3.1 MEMORY_SAVE: 618h
Field Bit Description
Memory_Save [0] 1 = Current status modes are saved to MEM_SAVE_CH (Self cleared)
[1-31] Reserved
Format:
3.3.2 MEM_SAVE_CH: 620h
Field Bit Description
Mem_Save_Ch [0-3]
Write channel for Memory_Save command.
Shall be >=0001 (0 is for factory default settings)
See BASIC_FUNC_INQ register.
[4-31] Reserved
Format:
3.3.3 CUR_MEM_CH: 624h
Field Bit Description
Cur_Mem_Ch [0-3]
Read: The current memory channel number
Write: Loads the camera status, modes and values from the specified memory channel.
[4-31] Reserved
Format:
3.3.4 Memory Channel Registers
The values of the following registers are saved in memory channels.
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.
33