Point Grey Flea3 USB 3.0 Technical Reference Revision History
Revision History
Revision Date Notes
1.0 September 22, 2011 Initial Document Version with support for model FL3-U3-32S2
2.0 November 25, 2011 Added support for model FL3-U3-13S2
2.1 November 29, 2011
Fixed broken links to knowledge base articles
Consolidated Specifications layout (no change to specifications data)
2.2 December 14, 2011 Removed Trigger Mode 14 which is not supported
2.3 January 30, 2012
Updated Frame Rate table for FL3-U3-32S2
Clarified Format 7 Mode 7 does not improve imaging performance
3.0 May 4, 2012
Added support for model FL3-U3-13Y3
Added installation instructions
Added Imaging Performance Specifications
Added register for FPNCorrection
Minor edits and clarifications
3.1 May 24, 2012 Removed broken graph
3.2 May 28, 2012 Removed Imaging Performance table for FL3-U3-13Y3; test data not yet available
4.0 June 5, 2012
Added support for model FL3-U3-88S2
Added chapter for Input/Output control
5.0 August 22, 2012
Added support for model FL3-U3-13E4
Updated Imaging Performance and QE graphs; added Dynamic Range comparison
Added Mode 10 for FL3-U3-88S2 (allows 12 MP)
Clarified FL3-U3-88S2 supports global reset on rolling shutter
Added section on pixel formats
Updated ADC section
Verified video mode descriptions and frame rates for all models
5.1 August 27, 2012 Fixed Chapter numbering
5.2 September 27, 2012
Removed unsupported trigger mode
Added sections on Global Shutter, Rolling Shutter, Global Reset, and Output Trigger
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.
153
To Next Page
Loading...
