Point Grey Flea3 FL3-U3 - 8.3 Status Indicator LED

Point Grey Flea3 USB 3.0 Technical Reference 8 Troubleshooting
8.3 Status Indicator LED
LED Status Description
Off Not receiving power
Steady green Camera receiving power (~3 seconds)
Flashing yellow Initializing FPGA (~1 second)
Steady yellow FPGA initialized (~1 second)
Steady yellow-green Sensor powered
Steady bright green Acquiring and transmitting images
Flashing bright, then brighter green Camera registers being accessed (no image acquisition)
Steady red Temporary camera problem
Slow flashing red Serious camera problem
8.3.1 LED_CTRL: 1A14h
Field Bit Description
Presence_Inq [0]
Presence of this feature
0: Not Available, 1: Available
[1-22] Reserved
LED_Ctrl [23-31]
Enable or disable the LED
0x00: Off, 0x74: On
Format:
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.
125