Point Grey Flea3 USB 3.0 Technical Reference 1 Welcome to Flea3 USB 3.0
To reduce heat, use a cooling fan to set up a positive air flow around the camera, taking into consideration the
following precautions:
n Mount the camera on a heat sink, such as a camera mounting bracket, made out of a heat-conductive material
like aluminum.
n Make sure the flow of heat from the camera case to the bracket is not blocked by a non-conductive material
like plastic.
n Make sure the camera has enough open space around it to facilitate the free flow of air.
Revised 9/27/2012
Copyright ©2011-2012 Point Grey Research Inc.
19
To Next Page
Loading...
