EasyManuals Logo

Polaris 600 RUSH 2010 User Manual

Polaris 600 RUSH 2010
512 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #190 background imageLoading...
Page #190 background image
4.26
Cleanfire Fuel Injection
Fuel Rail Microdampers
The DC-CFI-2 fuel rail assembly contains two fuel
pressure microdampers. The microdampers suppress
fuel pressure pulses that occur when each fuel injector is
activated.
The microdampers are considered “life of engine”
com
ponents and servicing is not recommended. If a
microdamper is removed, apply a light film of two-stroke
engine oil to the o-ring during installation.
Torque clamp fasteners to specification.
NOTE: A threaded plug is located on the MAG end of
ra
il. Do not remove plug.
= T
A: 3.3 ft-lbs (4.5 Nm) Apply Loctite 243® to threads.
FUEL RAIL
MICRODAMPERS w/O-RINGS
CLAMPS
A
PLUG
FUEL SUPPLY
FUEL RETURN
A

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 600 RUSH 2010 and is the answer not in the manual?

Polaris 600 RUSH 2010 Specifications

General IconGeneral
Horsepower120 HP
Engine Displacement599 cc
Cylinders2
CoolingLiquid
Bore x Stroke77.25 mm x 64 mm
Fuel SystemCleanfire Injection
IgnitionDigital CDI
Front SuspensionPRO-RIDE
Rear SuspensionPRO-RIDE
Track Width15 in
Track Lug Height1.25 in
Front Travel9 in
Ski Stance42.5 in
BrakeHydraulic Disc
Width48 in
StarterElectric
Drive ClutchP-85
Track Length121 in
Rear Travel14 in
Ski TypeGripper
Driven ClutchTEAM

Related product manuals