Name: Polaris 600 RUSH 2010
Brand: Polaris
Rating: 4 (1 reviews)

To Next Page

To Previous Page

9.31

Chassis

Left Bulkhead Clip Removal

1. Remove the following components:

• Right/left engine compartment door

•Hood

• Nosepan/bumper

• Exhaust pipe/silencer

• Oil tank/clutch cover assembly

• Airbox assembly

• Engine assembly

• Left-side front engine mount

• Bulkhead floor plate

• Left side front suspension components

• Lower steering arm

• Fuel tank (Remove fuel hoses and gasoline from

ank)

2. Drill out the rivets securing the left

fender to the

bulkhead and chassis.

3. Remove the five fasteners and nuts (including the two

ngine mount fasteners/nuts) securing the bulkhead

clip to the left side engine side support brace.

4. Remove the bulkhead clip fasteners/nuts.

5. Remove the cross shaft fastener from the bulk head

clip.

LOWER HEAT EXCHANGER MOUNT

Questions and Answers:

Need help?

Do you have a question about the Polaris 600 RUSH 2010 and is the answer not in the manual?

Polaris 600 RUSH 2010 Specifications

General