Name: Polaris 600 RUSH 2010
Brand: Polaris
Rating: 4 (1 reviews)

To Next Page

To Previous Page

8.34

Steering and Suspensions

Upper/Lower Control Arm Removal

1. Remove ski assembly and spindle.

2. Remove the sway bar link fastener.

3. Remove the shock from the lower control arm.

4. If removing the upper control arm, remove the four

loc

k nuts that secure the pivot shafts to the bulk head.

5. If removing the lower control arm, remove the four lock

uts that secure the pivot shafts to the bulk head. Note

that the forward fastener location is a bolt with nut.

Upper/Lower Control Arm Installation

1. If replacing the pivot shafts, bushings, or rod ends,

install the new parts. Reference the appropriate

component assembly views for correct orientation of

washers and bushings.

• Lower Control Arm

• Fixed Camber Upper Control Arm

• Adjustable Camber Upper Control Arm

2. If replacing the spherical bearing, reference Spherical

aring Replacement procedure.

Questions and Answers:

Need help?

Do you have a question about the Polaris 600 RUSH 2010 and is the answer not in the manual?

Polaris 600 RUSH 2010 Specifications

General