Polaris 600 RUSH 2010 User Manual

10.40
Battery and Electrical Systems
Full Length Hand Warmers
Some models feature integrated handlebar hooks with full length hand warmer elements. These hand warmers differ
from standard length warmers in that they are cut to match the bend of the integrated handlebar hooks. Because of this,
there are separate warming elements for the left and right side of the handlebar assembly.
To install, note the orientation of the hand
warmer element before removal. Reference the illustration and notes below
to properly install the element pads.
Assembly Notes:
• Install heater element pads .75in. (19mm) from
end
of handlebars.
• Orientate heater element pads 90° to hook bends.
Full Length Hand Warmer Resistance
Checks
RIGHT HAND WARMER ELEMENT
LEFT HAND WARMER ELEMENT
CIRCUIT (Wire Color)
RESISTANCE @ ROOM
TEMP. (68 F / 20 C)
STEEL HANDLEBARS
LOW (BLUE) to GROUND
(BROWN)
16 +/-10%
MEDIUM (BLUE/RED) to
GROU
ND (BROWN)
10 +/-10%
LOW or MEDIUM to CHASSIS
(SHORT)
O.L. (OPEN CIRCUIT)
ALUMINUM HANDLEBARS
LOW (BLUE) TO GROUND
(BROWN)
10 +/-10%
MEDIUM (BLUE/RED) to
GROU
ND (BROWN)
5 +/-10%
LOW or MEDIUM to CHASSIS
(SHORT)
O.L. (OPEN CIRCUIT)
STEEL HANDLEBARS
ALUMINUM HANDLEBARS

Polaris 600 RUSH 2010 Specifications

General

Horsepower	120 HP
Engine Displacement	599 cc
Cylinders	2
Cooling	Liquid
Bore x Stroke	77.25 mm x 64 mm
Fuel System	Cleanfire Injection
Ignition	Digital CDI
Front Suspension	PRO-RIDE
Rear Suspension	PRO-RIDE
Track Width	15 in
Track Lug Height	1.25 in
Front Travel	9 in
Ski Stance	42.5 in
Brake	Hydraulic Disc
Width	48 in
Starter	Electric
Drive Clutch	P-85
Track Length	121 in
Rear Travel	14 in
Ski Type	Gripper
Driven Clutch	TEAM