Name: Polaris 600 RUSH 2010
Brand: Polaris
Rating: 4 (1 reviews)

To Next Page

To Previous Page

10.13

Battery and Electrical Systems

9. Digital Wrench® will begin to reflash the ECU. A timer

and status indicator bar on the screen will indicate the

process is working.

NOTE: Do not disturb the vehicle or computer until

this

process is complete!

10. After the reflash process is complete, cycle the power

the ECU by disconnecting and then re-connecting

the ECU PWR 12 VDC power-up cable. Click the

FINISH button.

11. The following screen will appear. C

lick on the red X.

12. Determine if the Instrument C

luster Initialization

procedure has to be completed by starting the engine,

setting the parking brake, and then pressing and

holding the MODE and SEL buttons on the instrument

cluster.

Security System: Digital Wrench® Disable

The security system can be disabled by turning off the

function in the ECU. Select DISABLE SECURITY from

the SECURITY FUNCTIONS screen.

After selecting Disable Securit

y from the Security

Functions Menu, follow the step-by-step procedure as

outlined by Digital Wrench®. The process is the same as

the Enable Procedure.

NOTE: 2013 models do not require the user to

nerate a request code or obtain an authorization

code to enable or disable the security functions.

Reset Passcode

Questions and Answers:

Need help?

Do you have a question about the Polaris 600 RUSH 2010 and is the answer not in the manual?

Polaris 600 RUSH 2010 Specifications

General