EasyManuals Logo

Polaris 600 RUSH 2010 User Manual

Polaris 600 RUSH 2010
512 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #329 background imageLoading...
Page #329 background image
8.9
Steering and Suspensions
8
Adjusting the IFS shock spring preload raises or lowers
the front vehicle ride height and either increases or
decreases ski pressure when not accelerating. Increasing
spring preload will also shift the vehicle balance towards
the rear. Decreasing the spring preload will lower the front
vehicle ride height and shift the vehicle balance towards
the front.
The compression dampeners control ride comfort/quality.
T
urning the adjusters towards the SOFT setting (counter-
clockwise) will make the ride quality less harsh, but may
cause the shocks to bottom out. Turning the adjuster
towards the STIFF setting (clockwise) will make the ride
quality stiffer.
Make equal adjustments to both shocks and only one to
two clic
ks at a time. Heavier riders may want to set the
compression clickers two to four clicks higher than lighter
riders.
Rebound Adjustment
Rush 800 LE models feature IFS shocks with rebound
adjusters.
The rebound adjustment clicker is
located at the bottom of
the shock rod. There are 16 possible settings. The initial
factory setting is 8 clicks.
Make equal adjustments to both shocks and only one to
two c
licks at a time.
Turning the clicker clockwise (inwards) increases
rebound control and the s
hock will extend slower
after being compressed.
Turning the clicker counter-clockw
ise (outwards)
decreased rebound control and the shock will
extend faster after being compressed.
Walker Evans™ Spring Retainers
Some Walker Evans™ shocks feature a spring retainer
and a lock collar. Apply one to two drops of RED thread
lock to lock collar threads after adjusting spring length on
these shocks.
SPRING RETAINER
LOCK COLLAR

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris 600 RUSH 2010 and is the answer not in the manual?

Polaris 600 RUSH 2010 Specifications

General IconGeneral
Horsepower120 HP
Engine Displacement599 cc
Cylinders2
CoolingLiquid
Bore x Stroke77.25 mm x 64 mm
Fuel SystemCleanfire Injection
IgnitionDigital CDI
Front SuspensionPRO-RIDE
Rear SuspensionPRO-RIDE
Track Width15 in
Track Lug Height1.25 in
Front Travel9 in
Ski Stance42.5 in
BrakeHydraulic Disc
Width48 in
StarterElectric
Drive ClutchP-85
Track Length121 in
Rear Travel14 in
Ski TypeGripper
Driven ClutchTEAM

Related product manuals