Polaris 600 RUSH 2010 User Manual

4.48
Cleanfire Fuel Injection
The next screen will display the current idle voltage setting. The text will match the voltage specification required by the
vehicle.
If the voltage is within specification, the dialogue
box will indicate the current TPS setting is within specifications, and
the CONTINUE button will be RED.
If the voltage is outside specification, the dialogue box will indicate the current TPS s
etting is outside specifications, and
the CONTINUE button will be GREEN.
If the technician clicks on the RED CONTINUE button on the TPS Setting
screen, the following screen will be displayed.
This screen prompts the user to verify they want to make an adjustment to the TPS knowing the idle voltage setting is
within specification.
Clicking NO will end the procedure and return the user
to the Special Tests Menu. Clicking YES will display the TPS
Initialization Procedure screen.

Polaris 600 RUSH 2010 Specifications

General

Horsepower	120 HP
Engine Displacement	599 cc
Cylinders	2
Cooling	Liquid
Bore x Stroke	77.25 mm x 64 mm
Fuel System	Cleanfire Injection
Ignition	Digital CDI
Front Suspension	PRO-RIDE
Rear Suspension	PRO-RIDE
Track Width	15 in
Track Lug Height	1.25 in
Front Travel	9 in
Ski Stance	42.5 in
Brake	Hydraulic Disc
Width	48 in
Starter	Electric
Drive Clutch	P-85
Track Length	121 in
Rear Travel	14 in
Ski Type	Gripper
Driven Clutch	TEAM