5.8
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
6. Remove the torx fasteners
r
and push rivets
t
retaining the intake plenum.
NOTICE
Cut the strain relief cable tie retaining the wiring
harness to the intake plenum.
7. Remove the push rivets
y
retaining the intake tube to
the intake plenum.
8. Remove the ziptie
u
securing the upper intake tube
to the chassis.
9. Remove the fastener
i
retaining the lower intake
tube.
10.Remove the diagnostic connector
o
from the cap.
11. Carefully remove the intake tube as an assembly.
12.Disconnect the ECU connectors
a
form the wiring
harness.
13.Carefully remove the intake plenum.
FUEL SYSTEM