10.66
9850060 R02 - 2020-2021 850 AXYS™ Long Track Snowmobile Service Manual
© Copyright Polaris Inc.
CHANGING TO A NEW SECURITY CODE
Any time you wish to change your current security code to a new code, perform TASK 2 through TASK 4 of the First
Time Use of Your Security System procedure. Instead of using the factory default code “000” in TASK 2 and TASK 3,
use your current security code.
SECURITY SYSTEM ACCESS QUICK REFERENCE
Now that you have become familiar with the procedure for locking and unlocking the system, use the chart below as a
quick reference.
SECURITY SYSTEM ACCESS QUICK REFERENCE CHART
Action Result
1. Start engine
2. Press and hold the center
button
3. Press and release the SET button
until SECURITY appears in
information display area.
4. Press and release SET button.
Displays ENTER CODE (to lock the system)
Press and release the SET button Advances a digit on the ENTER CODE screen
Press and hold the SET button Accepts a digit and displays the next digit position (if any remain) on the
ENTER CODE screen
While SECURITY OFF is shown on the
information display area, simultaneously
Press and hold the MODE and SET
button.
Allows user to change security code.
BATTERY / ELECTRICAL
To Next Page
Loading...
Need help?
General
