3.20
ENGINE
27. Disconnect the fuel line from the fuel injector rail by
slightly squeezing the lock tabs and gently pushing the
connector lock out. To separate the lines, pull the fuel line
from the tank strait down.
28. Disconnect the shift cable from the transmission bell crank.
29. Mark the upper jam nut and loosen the lower jam nut. Pull
the shift cable out of the mount.
NOTE: If the upper jam nut is moved, shift cable
adjustment will be required during engine
installation (see Chapter 2 “Shift Cable Inspection /
Adjustment”).
30. Disconnect the transmission gear indicator switch harness.
31. Disconnect the CPS harness.
32. Disconnect the stator / alternator harness.
Squeeze locking tabs together
Push lock outward
Lower
Jam Nut
Mark Upper
Jam Nut
To Next Page
Loading...
