Polyend Play+ - Page 141

141
Polyend Play+ Manual Rev 2
NOTES
Sequencing Patterns
6
▌ CREATING A BLANK CUSTOM FILL TEMPLATE
Creating a project as a blank template in the proper ll structure can speed
up workow when creating custom beat, melody, chord or MIDI templates.
Folders must contain at least 1 sample in the relevant category.
1. Press (Screen) to select the menu. Turn (Screen) to navigate to
highlight ‘File’ in the menu. Press (Screen) to select.
2. Turn (Screen) to highlight ‘New Project’. Press (Screen) to select the
highlighted ‘New Project’ option.
3. A prompt to save the current project may be presented. Select ‘Yes’ or
‘No’. A new project will be created with the default settings.
4. Once a new empty project has been created, load the sample folders.
This must be performed precisely in the dened order. The order of
loading denes the actual instrument and not the folder name.
5. Press (Screen) to select the menu. Turn (Screen) to navigate to
highlight ‘Samples’ in the menu. Press (Screen) to select.
6. Turn (Screen) to highlight ‘Load Files or Folders’. Press (Screen) to
select this option.
7. Navigate to the folder to load. Samples can be created and stored in the
appropriately named folder externally. Press [Load Folder] screen
button on the selected folder. The loading of folders MUST be
performed in this order:-
1. Bass. Load the folder named ‘Bass’ containing bass samples.
2. Kick. Load the folder named ‘Kick’ containing kick samples.
3. HiHat. Load the folder named ‘HiHat’ containing hat samples.
4. Snare. Load the folder named ‘Snare’ containing snare samples.
5. Any other synth. Load a folder containing synth samples.
6. Any other synth. Load a folder containing synth samples.
7. Synth. Load the folder named ‘Synth’ containing synth samples.
8. Save the project. Press (Screen) to select the menu. Turn (Screen) to
navigate to highlight ‘File’ in the menu. Press (Screen) to select.
9. Turn (Screen) to highlight ‘Save Project As’. Press (Screen) to select
then press [Save] screen button. Enter a relevant name i.e. ‘Fill Empty
Template’ and press [Save].