EGM-5 Operation Manual V. 1.04 44 support@ppsystems.com
(ppm)
2
Avg Limit is the threshold that new CO
2
readings must exceed in order
to trigger the start of a new running average. Values up to 100 ppm are allowed.
The default value is 30 ppm.
Returns to the Settings 2 Menu.
To change the CO
2
Averaging Limit, select the button to the right of the “CO2 Avg Limit (ppm):” text. The
numerical keypad will appear, allowing a new number to be entered.
After entering the desired value, press the “Back” button to return to the Settings 2 Menu.
EGM ID
This function allows the user to change/view the settings of the EGM ID parameter used by the EGM-5.
This parameter sets an identifier for each EGM-5 so data can be differentiated between multiple
instruments.
Sets an identifier for use when more than one EGM-5 is employed
simultaneously. The default value is 1.
Returns to the Settings 2 Menu.
EGM ID
To change the EGM ID, select the button to the right of the “EGM-5 ID:” text. The EGM ID settings will be
displayed, with the current selection indicated.
To Next Page
Loading...
Need help?
General
