PP Systems EGM-5 User Manual

EGM-5 Operation Manual V. 1.04 91 support@ppsystems.com
Data Storage/Measure Format Settings Table
This table describes the different data storage information and measurement formats available in the
EGM-5.
General M Format
Mtype
1-6
M
Date
dd/mm/yy
Header
Time
hh:mm:ss (24hr)
Plot No.
0-999
Rec No.
1-9999
CO
2
Ref
CO
2
reading in parts per million (ppm = µmol mol
-1
)
Measured Data
AP
Atmospheric pressure in millibars (mb)
Flow
Sample flow (cc/min)
H
2
0 Ref
H
2
O reading in millibars (mb) (if optional H
2
O sensor
is installed).
RHT
Temperature of RH sensor (˚C) (if optional H
2
O sensor
is installed).
O
2
Ref
O
2
percentage (if optional O
2
sensor is installed).
Error Code
Aux (Analog Out)
Voltage
Volts
Probe Data
PAR
PAR: µmol m
-2
s
-1
Temperature Soil
˚C
Temperature Air
˚C
RH
Relative Humidity (%)
Parameter 1
Process
Data
Parameter 2
Parameter 3
Parameter 4
Parameter 5
Process Data Fields
The process data fields are based on the measurement mode used with the EGM-5. The 5 different
modes available are:
1. Measure mode
2. SRC or Custom mode
3. CPY Mode
4. Injection mode
5. Static mode

PP Systems EGM-5 Specifications

General

Brand	PP Systems
Model	EGM-5
Category	Measuring Instruments
Language	English