EGM-5 Operation Manual V. 1.04 90 support@ppsystems.com
Each time the memory stick is removed and then reinserted, or when the instrument is power cycled, a
new file is created and the increment ‘I’ is increased. Any files in this directory with extensions other than
.txt do not contain valid data and may be deleted or ignored.
Even if the Measure Interval is set to 0, Zero Operations and Process data are still sent to the USB, even
though CO
2
measurement data is not.
Refer to Error Messages on page 117 for disk errors.
To Next Page
Loading...
Need help?
General
