PP Systems EGM-5 - Custom - Start Process (Step 1); Custom - Volume and Area Settings (Step 2)

EGM-5 Operation Manual V. 1.04 65 support@ppsystems.com
Custom – Start Process (Step 1)
The first screen asks the user to confirm that they would like to start the Custom process.
Custom – Start Process Menu
Back
Returns to the Processes Menu.
Status Box
Any information or error messages are displayed here.
Right Arrow
Confirms and starts the Custom process by displaying the Custom – Volume
and Area Settings menu (Step 2).
Custom – Volume and Area Settings (Step 2)
The volume and area settings are defined in this screen.
Important Note. You must remember to account for any volume changes in order for the instrument to
properly calculate assimilation rates. If using collars, please make sure that you adjust the volume
accordingly.
Status Box
Back

Would you like to start the custom
process or go back?
Custom - Start Process
Autozero
Custom - V and A Settings
Volume (ml):
2000
Area (cm2):
100
Volume/Area Ratio:
20
Status Box
Stop
