8. Adjust the drive belt tension and Step-up belt tension, see "Input Drive and Step-up
Belt Tension Adjustment" on page48.
9. Replace the stairarms, see "Crankarm Assembly Replacement" on page151.
10. Replace all removed covers, see "Covers and Panels Replacement" on page75.
11. Do the Operation Verification tests (see "Operation Verification" on page19) and
return to service.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 162
6 Available Replacement Procedures
Pillow Block Bearing Replacement
To Next Page
Loading...
Need help?
General
