Data Cable Troubleshooting
Troubleshooting the Upper and lower Data Cables.
Typical symptoms associated with a defective data cable is either an error 30 or no power to
the console upper PCA
1
. This procedure requires that you have a known good condition
upper data cable and lower data cable.
1. .If you are troubleshooting an error 30 or 32 continue.
2. Remove the left outrigger tube and disconnect the upper data cable from the console
1
Printed circuit assembly, generally referred to as either an upper PCA or lower PCA.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 219
7 Troubleshooting
System Troubleshooting Procedures
To Next Page
Loading...
Need help?
General
