Adjustment Procedures
Adjustment procedures provide you with the step-by-step adjustment instructions to bring
systems and components into specification. Perform the adjustment procedures whenever
a trouble symptom points to a particular component and after a major component is
removed/replaced.
Available Ajustment Procedures
"Input Drive and Step-up Belt Tension Adjustment" on the next page
"Lift Motor Calibration" on page63
"Input Drive Assembly Adjustment" on page69
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 47
5 Adjustment Procedures
Available Ajustment Procedures
To Next Page
Loading...
