INFORMATION DISPLAY DESCRIPTION
uPA current Version The console upper current software version information.
CPA
1
Boot Version The CPA boot up software version.
CPA Current Version The CPA current operating software version.
GUI Current Version The graphic userI interface software version.
GUI Restore Version The graphic userI interface restore software version.
My Settings Menu (5671)
menu: Settings > My Settings.
The My Settings menu is used to customize the equipment user interface localization and
Workouts default settings.
To learn about the R40 console My Settings service menu, see the TRM445 Owners
Manual:
l
Owners Manual.
R20 Standard Service Menus
R20 Standard Service Menus
The Standard Service Menus include the HardwareValidation, Information, and My Set-
tings service menus.
TIP: To learn additional information about the R20 console standard service menus,
refer to the TRM425 Owners Manual, see
Owners Manual
.
Hardware Validation (51765761)
Service Access Code: 51765761 (see "R20 How To Access Standard Service menus" on
page39)
The Hardware Validation menu provides a set of automated hardware diagnostic tests and
calibration procedures used to troubleshoot, calibrate, and verify machine operation. The
diagnostic tests are customized for the particular equipment type and console configuration.
1
Touchscreen console Control Processing Assembly.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 42
4 Standard Service Menus
Standard Service Menus
To Next Page
Loading...
Need help?
General
