Parts
About
Equipment replacement part numbers are obtained from the Exploded View Diagram and
Parts List documents. The Exploded View Diagram shows a picture of the disassembled
machine and is used to identify the machine replacement parts and bubble numbers. The
Parts List is used to obtain the Precor part number using the part bubble number.
l
First use the machine Exploded View Diagram to identify a machine replacement part
and the associated bubble number.
l
Then go to the Parts Identification List and use the part bubble number to obtain the
Precor part number.
The service manual include PDF copies of the equipment Exploded View Diagram and
Parts Identification List. These documents are primarily intended to be used as a quick ref-
erence when servicing the equipment. However, the service manual may not reflect the
latest equipment part updates. So always refer to the equipment Exploded View Diagram
and Parts Identification List on Precor Connect to obtain the latest part information.
TIP
: It is recommended that you go to the
Precor Connect
servicer website to
obtain the most current version of the Exploded View Diagram and part number
information.
Precor Connect Partner's website
If you have online web access, it is always recommended that you go to the servicer Pre-
cor Connect Partner's website to view the equipment's most current Exploded View Dia-
gram and Parts Identification List information.
How to use Precor Connect to find part Information
1.
Log in to the Precor Connect Partner website.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 240
11 Parts
About
To Next Page
Loading...
Need help?
General
