Standard Service Menus
(Applies To: R20 & R40 consoles)
About
The R20 and R40 consoles provide standard service menus that allow you to configure user
workout settings, view equipment usage information; and service hardware validation dia-
gnostic tests. Review the following R20 and R40 console service menu access codes topics
for specific standard service menu options.
Service Menu Access Codes
R40 Service Menu Access Codes
SERVICE MENU
ACCESS CODE SERVICE MENU FUNCTION
51765761
(536*)
Hardware Validation
Diagnostics
Set of automated diagnostic tests
used to troubleshoot, calibrate, and
verify machine operation.
65 Information Display 1) Information page; provides
product software/hardware version
and equipment usage information
2) Display Error Log; provides his-
tory of event error codes and dia-
gnostics used for maintenance and
troubleshooting.
5671 My Settings Customizable user workout set-
tings.
5555** DEMO mode** DEMO mode is used to demon-
strate the R40 console Workout pro-
gram screens. DEMO mode
continuously cycles through each
Workout program until DEMO
mode is exited**, see "DEMO
Mode" on page45.
Important: DEMO mode can easily
fool you into believing that the con-
sole is not operating correctly.
DEMO mode locks-out the use of
all operating hardkey and softkey
menu controls. Tne console con-
trols cannot be used until DEMO
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 36
4 Standard Service Menus
Standard Service Menus
To Next Page
Loading...
Need help?
General
