• AC
1
Clamp-on averting current meter • DVM Multimeter
• ESD
2
wrist strap and pad • Compatible HR
3
chest strap or Polar HRM
simulator xmitter (Precor PN:
PPP000000020045101)
• 12 " wonder bar • Vacuum cleaner (recommend ESD safe
model)
• Gates Carbon Drive Belt Tension APP • Drive Belt tension Gauge (Kent-Moore BT-
33-73-F
Supplies
• Super Lube Gel with Teflon by Permatex
(1)
• Cleaning rags
• Loctite 243 Blue Medium Strength Thread-
locker
• Cleaner Degreaser (see "" on page15)
• Cable tie assortment (1 3/4", 3", 4"
lengths)
(1)or equivalent synthetic teflon based grease (Mobil 1, NLGI 2 Teflon Synthetic Grease).
Specification Summary
Fastener Torque Specification
System component fastener torque specification:
System Component Specification
RF
4
coax connector 2.4 in-lbs (0.271 Nm)
Display mounting fasteners 180 in-lbs (20 Nm
1
Alternating Current: electric current which periodically reverses direction between positive
and negative polarity.
2
Electrostatic Discharge or Electrostatic Sensitive Device.
3
Heart Rate
4
Radio Frequency: Identifies electromagnetic signals with frequency spectrum between the
3 kHz (3,000 hertz) to 300 GHz (300 billion hertz) range.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 11
2 General Information
Specification Summary
To Next Page
Loading...
Need help?
General
