Installation
5. Reinstall the wheel into the stairarm bracket and secure using the two retainers (2)
and Nylock bolts (2x). Fully tighten and torque to specification 60 in-lbs (6.8 Nm).
6. Reinstall the Stairarm, see "Stairarm Assembly Replacement" on page163.
7. Reinstall all removed covers, see "Covers and Panels Replacement" on page75.
8. Do the Operation Verification tests (see "Operation Verification" on page19) and
return to service.
Contact Precor Customer Support at support@precor.com or 800.786.8404 with
any questions.
Page 171
6 Available Replacement Procedures
Stairarm Wheel Assembly Replacement
To Next Page
Loading...
