List Of Messages
65
LOAD PAPER
Printer is out of paper. 1. Load paper. Press CLEAR. If
message does not clear, go to
the next step.
2. Check for black or colored back
on paper being used in printer.
The paper out detector is optical
and may not detect paper with a
black or dark backing facing the
detector. Try media with a white
or light back. If media with white/
light back works and black/dark
media does not, replace the
paper detector switch with the
optional black back forms switch
assembly. (See page 244, item
3.)
3. Power off the printer. Remove the
paper path or pedestal top cover.
Remove the barrier shield
(cabinet model) or the barrier
shield and paper guide (pedestal
model). Check that the paper
detector switch assembly is
securely mounted in its bracket.
4. Check that connector P106/PMD
is fully seated in connector J106
on the controller board.
5. Load paper. Power on the printer.
Replace the paper detector
switch assembly if message
appears.
6. Load paper. Power on the printer.
Replace the controller board if
message appears. Record the
message and return it with
defective board.
LOADING PROGRAM
FROM PORT XX%
Status message: the new
emulation program is
loading into printer RAM.
XX% indicates how much of
the program has loaded.
No action required.
Table 2. Message List
Message Explanation Solution
To Next Page
Loading...
