Promise Technology Vess R3600 Series User Manual

Making Controller Settings
In a dual-controller RAID subsystem, settings made to one controller are applied to both controllers.
To make controller settings:
1. Click the Device tab.
2. Click the Component List icon.
3. For the controller you want to congure, then click the Gear icon and select the Settings option.
4. Make settings changes as required:
• Enter, change or delete the alias in the Alias eld.
• HDD Power Saving – Choose time periods from the drop-down menus.
After an HDD has been idle for the set period of time:
* Power Saving Idle Time – Parks the read/write heads.
* Power Saving Standby Time – Lowers disk rotation speed.
* Power Saving Stopped Time – Spins down the disk (stops rotation).
• Coercion – Check the box to enable or uncheck to disable.
• Coercion Method – Choose a method from the drop-down menu:
* GBTruncate
* 10GBTruncate
* GrpRounding
* TableRounding
• Write Back Cache Flush Interval – Enter a value into the eld, 1 to 12 seconds.
• Enclosure Polling Interval – Enter a value into the eld, 15 to 255 seconds.
• Adaptive Writeback Cache – Check the box to enable or uncheck to disable.
• Host Cache Flushing – Check the box to enable or uncheck to disable.
• Forced Read Ahead (cache) – Check the box to enable or uncheck to disable.
• SMART Log – Check the box to enable or uncheck to disable.
• SSD Trim Support – Check the box to enable or uncheck to disable.
• SMART Polling Interval – Enter a value into the eld, 1 to 1440 minutes
• Pseudo Device Type - From the drop-down menu, choose:
* DAS
* CTRL
5. Click the Save button.
102
Promise Technology Vess R3600 / Vess J3600 Product Manual

Promise Technology Vess R3600 Series Specifications

General

Brand	Promise Technology
Model	Vess R3600 Series
Category	Storage
Language	English