• Controller ID
• Alias – If assigned
• Readiness Status
• Power On Time
• LUN Mapping method
• Serial Number
• WWN – World Wide Name
• Dirty Cache Usage – Percentage
• Boot Loader Version
• Firmware Version
• Software Version
• Operational Status
• SCSI Protocol Supported
• Part Number
• Hardware Revision
• Cache Usage – Percentage
• Host Cache Flushing
• Boot Loader Build Date
• Firmware Build Date
• Software Build Date
Viewing Controller Information
To view controller information:
1. Click the Device tab.
2. Click the Component List icon.
3. Click the controller you want, then click the View button.
Basic controller information includes:
103
Promise Technology
Management with WebPAM PROe
To Next Page
Loading...
