Promise Technology Vess R3600 Series User Manual

Table of Supported Commands (Continued)
Command Action
encldiag View enclosure element information.
enclosure
View or edit enclosure and SEP information and settings. Locate an enclosure via
LEDs.
event View or clear events logs.
export Subsystems only. Export les to remote TFTP host.
factorydefaults Restore settings to factory defaults.
fc View or edit fc information and settings. Fibre Channel host interface product only.
folder List, add, modify, delete and refresh folder.
group List, add, modify or delete nas group.
import Import les or license from remote TFTP host.
initiator View initiator list, add or delete initiator entry.
iscsi View or edit iSCSI information and settings. iSCSI host interface product only.
isns View or edit iSNS information and settings. iSCSI host interface product only.
license View license information.
logout Logout session for the current user.
lunmap
View the LUN mapping and masking table. Enable or disable LUN mapping and
masking on iSCSI and Fibre Channel host interface product.
Add, delete or modify a LUN mapping and masking entry.
maintenance Enter or exit maintenance mode.
migrate Start or stop volume migration
mp
View media patrol status and progress.
Start, stop a media patrol process.
n a s c o n  g List, reset or restore NAS conguration
nasshare NAS share settings
net View or edit ethernet network information and settings.
ntp View or edit NTP status and settings
pair List, add, modify and delete pair.
password Modify a user’s password
Note: Commands are NOT case sensitive.
174
Promise Technology Vess R3600 / Vess J3600 Product Manual

Promise Technology Vess R3600 Series Specifications

General

Brand	Promise Technology
Model	Vess R3600 Series
Category	Storage
Language	English