Table of Supported Commands (Continued)
Command Action
pcie View PCIe slots information in controller.
pdm
View PDM status and progress.
Start, stop, pause or resume a PDM process.
periodsnap List, add, modify or delete periodic snapshot task.
phydrv View or edit physical drive information and settings. Locate a physical drive via LEDs.
ping Ping another system through management port.
pool View or edit pool information. Create, edit or delete a new or existing pool.
protocol Protocol settings.
ptiash Update system software and rmware through tftp server.
quota List, set, cancel or refresh the Quota settings on NAS Share.
rb View rebuild status and progress. Start, stop, pause, or resume a rebuild process.
rc
View redundancy check status and progress. Start, stop, pause or resume
redundancy check.
replication View volume replication status. Start or stop replication.
sasdiag SAS diagnostic command.
sc View spare check status. Start spare check.
session View the list of active sessions.
shutdown Shutdown or restart system.
smart S.M.A.R.T diagnostic for physical drives.
Note: Commands are NOT case sensitive.
175
Promise Technology
Managing with CLI
To Next Page
Loading...
Need help?
General
