bga
Usage
bga [-a <action>]
bga -a mod -s “<list of settings>”
Summary
The bga command displays all current background activities and makes settings for each background activity.
Options
-a <action> Species the action to perform.
list (Default) Lists current background activities.
mod Makes changes to one of the settings.
-s “<option>=<value>” Species which background activity settings to change.
autorebuild= Enable or disable auto-rebuild and auto-transition.
enable Auto-rebuild initiates a rebuild of an array when an uncongured
drive is inserted into the slot of a dead drive.
disable Auto-transition means transitioning is initiated on a used revertible
spare in the following condition:
1. When the rebuild has been completed using the revertible spare, and
2. When an uncongured drive is inserted into the slot of the dead drive
which the was part of the array.
or
When a non-revertible spare has been inserted or created, and is
applicable to the array This option affects all arrays on the subsystem.
<bg task>=<rate> Background task rates are used to determine what percentage of the IO
load on the controller should be dedicated to the background task. A
lower number will mean the task takes longer to complete, a higher
number will cause the task to complete faster, all other things being equal.
189
Promise Technology
Managing with CLI
To Next Page
Loading...
Need help?
General
