rebuildrate= Rebuild rate determines the rate at which rebuild will run.
(low=25, medium=50, high=75)
low
medium
high
rcrate= Redundancy check rate determines the rate at which redundancy
check will run. (low=25, medium=50, high=75)
low
medium
high
syncrate= Synchronization rate determines the rate at which synchronization
will run. (low=25, medium=50, high=75)
low
medium
high
bga
bga -a mod -s”rebuildrate=high”
Type ‘ | grep “word1,word2,...”’ at the end of each command, to display
ltered info.
Examples
190
Promise Technology
Vess R3600 / Vess J3600 Product Manual