Promise Technology Vess R3600 Series - Page 230

Examples
encldiag -a list
encldiag -a list -t all
encldiag -a list -e 1 -t psu
encldiag
Usage
encldiag -a <action> -e <EnclosureId> -t <element type>
Summary
The enclosure diagnostic command is used to get enclosure element information, such as PSU usage, PSU
power on time.
Options
-a <action> Which action to perform.
list Display enclosure diagnosis information.
-e <enclosure ID> Used to specify enclosure ID.
-t <diagnose type> Used to specify type of diagnosis.
all (Default) Display the all enclosure diagnosis information.
psu Display the PSU Usage Info.
powerontime Display the enclosure element power on time information.
210
Promise Technology Vess R3600 / Vess J3600 Product Manual