Promise Technology Vess R3600 Series - Page 237

fc
Usage
fc [-a <action>] [-t <Type>] [-i <CtrlId>] [-p <PortId>] [-v]
fc -a mod -t <Type> -i <CtrlId> -p <PortId> -s “<list of settings>”
fc -a reset -i <CtrlId> -p <PortId>
Summary
The fc command is used to view and modify Fibre Channel information and settings. Fibre Channel host
interface product only.
Options
-a <action> Which action to perform.
list (Default) Gives summary information about Fibre Channel status.
mod Modify Fibre Channel settings.
reset Reset Fibre Channel port(s)
clear Clear the port statistics.
-t <type> Species what type of information to display or modify.
node Display Fibre Channel node information.
port (Default) Species Fibre Channel port as the device type to
display or modify information.
SFP Display port SFP (Small Form Factor Pluggable) information.
stats Display port statistics information.
loggedininitiators Display port logged in initiator information.
loggedintargets Display port logged in target information.
fabricdevices Display devices list from fabric switch.
-i <ctrlId> Controller Id. Default to be all available controllers for listing if -i is not
specied. Default to be controller 1 for modifying if -i is not specied.
217
Promise Technology Managing with CLI