Promise Technology Vess R3600 Series - Page 265

The following settings apply to portal. Requires -t portal or -t portal -m and -c <controllerr id> options.
ip= Specify the primary IP address.
ipmask= Specify the primary subnet mask.
gateway= Specify the gateway.
dhcp= Enable or disable DHCP support.
Currently only supported for ipv4.
enable
disable
Followings are global settings apply to portal. Requires -t portal option.
primarydns= Set an IP address of the primary DNS server.
secondarydns= Set an IP address of the secondary DNS server.
autodns= Obtain DNS from DHCP server. Only valid when
DHCP is enabled on the default route portal.
enable
disable
defaultroute= Default route on which portal type.
oatingip
staticip
ioportal
ctrl1portalid= Default route portal ID on controller1. Valid for defaultroute as ioportal.
ctrl2portalid= Default route portal ID on controller2. Valid for defaultroute as ioportal.
245
Promise Technology Managing with CLI