Promise Technology Vess R3600 Series - Page 264

Options
-a <action> Which action to perform.
list (Default) Displays a list of IP congurations.
mod To modify current network settings.
enable To enable IPv4/IPv6 for portal type. To enable IO support for port type.
disable To disable IPv4/IPv6for portal type. To disable IO support for port type.
-t <type>
port
portal (Defaults)
-m Physical portal IP congurations.
This option must be specied in maintenance mode
-c <ctrl ID> Species the controller ID. When the action is to modify setting and -c is
not specied, the value is default to be the current controller id.
-p <port ID> Species the port ID.
-f <protocol family> To specify which protocol family will be modied, enabled or disabled.
ipv4 (Default)IPv4.
ipv6 IPv6.
-y Execute command in non-interactive mode.
Only valid for disable, mod action.
-s “<option>=<value>” List the various settings for the MGMT ports and portals.
These options are comma separated.
Works only with modify command.
244
Promise Technology Vess R3600 / Vess J3600 Product Manual