srcip= source portal ip.Only valid for remote replication.
dstip= destination portal ip.Only valid for remote replication.
srcwwn= source subsys wwn.Only valid for remote replication. It’s optional when
start remote replication.
dstwwn= destination subsys wwn.Only valid for remote replication.
-v Verbose mode. Used with -a list.
-y Enable non-interactive mode.
replication -a list
replication -a start -t local -i 1 -p 0 -s “name=test, syncmode=async”
replication -a start -t remote -i 1 -p 0 -s “name=test, syncmode=async,
mode=active-passive, srcip=10.20.30.1, dstip=10.20.30.2”
replication -a stop -i 2 -t remote
replication -a pause -i i -t remote
replication -a resume -i 1 -t remote
Examples
273
Promise Technology
Managing with CLI
To Next Page
Loading...
