Promise Technology Vess R3600 Series - Page 292

-i <ID> Source or destination volume ID for stop action. Source volume ID for
other actions. When used with -a stop action. For local location, it means
source volume ID. For remote location, if role is source, it means source
volume ID; if role is destination, it means destination volume ID.
-p <pool id> Destination pool ID.
Only valid for -a start specied
-s “<option>=<value>” Used to specify replication settings.
Only valid for -a start specied
name= Destination volume name.
mode= mode method. Only valid for remote replication.
active-passive (Default)
active-active
syncmode= sync mode method
async
semi-sync
sync (Default)
period= Period of sync cycle.Unit is hour(s).
0 always sync.
1
2
4
6
8
12
24
272
Promise Technology Vess R3600 / Vess J3600 Product Manual