Promise Technology Vess R3600 Series - Page 296

rc
rc -a start -l 3 -n -p
rc -a start -l 3
rc -a stop -l 2
Examples
sasdiag
Usage
sasdiag -a <action> -e <EnclosureId> -i <expanderId> [-p <PHYId>]
Summary
Diagnostic command for getting SMP discovery info, getting PHY error log, or clear the error log. For products
that support multiple enclosures only.
-a <action> Which action to perform.
discover Display SMP general discovery information.
errorlog Display error log on a certain expander.
clearerrlog Clear error log on a certain PHY.
-l <PHY Location> The location where PHY resides. If -l is not specied, the default value is
expander.
expander
c2cport
-e <Enclosure ID> Used to specify which enclosure ID.
-i <Expander ID> Used to specify which expander ID.
-p <PHY ID> Used to specify which PHY ID you wish to issue clear errorlog.
Only used with -a clearerrlog option.
276
Promise Technology Vess R3600 / Vess J3600 Product Manual