Navigate to Node 1 of the 192.168.22
subnet (i.e. 192.168.22.20). Notice that
the module’s network data appears in the
center. Also notice that the Upstream
connection for this Node is None
Enter 192.168.21.23 as the I.P. address
for Node 1’s new Upstream connection.
Click Apply to make the change. Please
note that it will take a few seconds for this
to complete
Last modified: Aug 18, 2020
PULSEROLLER ConveyLinx-Ai2 User's Guide - 1.7
Page 118 of 154
To Next Page
Loading...