RADWAG MA X2.IC.A Series User Manual

- 103 -
24. COMMUNICATION PROTOCOL
General Information
A. A character based communication protocol (moisture analyzer-indicator) is designed for
establishing communication between a RADWAG moisture analyzer and a peripheral
device.
B. The protocol consists of commands sent from a peripheral device to the weighing
instrument and responses from the weighing instrument.
C. Responses are sent from the weighing instrument each time a command is received.
D. Commands, forming the communication protocol, enable obtaining data on weighing
device status and facilitate influencing weighing device operation, e.g.: acquiring
measurement results from the weighing device, zeroing, etc.
24.1. List of Commands
Command
Command overview
Z
Zeroing
T
Taring
OT
Give tare value
UT
Set tare
S
Send stable measurement result in basic measuring unit
SI
Immediately send measurement result in basic measuring unit
SU
Send stable measurement result in current measuring unit
SUI
Immediately send measurement result in current measuring unit
C1
Switch on continuous transmission in basic measuring unit
C0
Switch off continuous transmission in basic measuring unit
CU1
Switch on continuous transmission in current measuring unit
CU0
Switch off continuous transmission in current measuring unit
DH
Set min checkweighing threshold
UH
Set max checkweighing threshold
ODH
Give value of min checkweighing threshold
OUH
Give value of max checkweighing threshold
SM
Set mass value of a single item
TV
Set target mass value
RM
Set reference mass value
NB
Give moisture analyzer serial number
SS
Value release
IC
Internal adjustment performance
IC1 Disable automatic internal adjustment of the moisture analyzer
IC0
Enable automatic internal adjustment of the moisture analyzer
K1
Lock moisture analyzer keypad
K0
Unlock moisture analyzer keypad
OMI
Give available working modes
OMS
Set working mode

RADWAG MA X2.IC.A Series Specifications

General

Brand	RADWAG
Model	MA X2.IC.A Series
Category	Measuring Instruments
Language	English