Exemplary report:
20.1. End Result Prognosis
This option enables estimating end result before drying process is completed.
Based on characteristics of current drying curve, created online, moisture analyzer estimates
the end result of drying process.
It is an approximate result characterized with small error (about +/- 10% of the end result for
most of the products and +/- 20% for products that require drying process to be longer such
as: plastics, gels and materials containing more than 30% of water).
This option is useful for users who need faster estimation of the drying process end result.
The time of the prognosis process ranges between 15% and 40% of the standard drying
time.
Caution: Do not open the weighing chamber during drying process while using prognosis
option. It may distract the process and the calculations would be incorrect.
Prognosis is finished when the drying chamber is opened and a suitable message is
displayed.
To Next Page
Loading...
Need help?
General
